Reliability testThe purpose of reliability test on Siliup products is to find out the weak points, to understand, verify, evaluate, analysis and improve the reliability of products. Different levels of chips will work under different application environments. The more complex the application environment, the requirements on reliability will be higher and stricter. All our products have been tested strictly before shipment to ensure that the products delivered to customers are verified. However, in order to evaluated the performance after working long times, further reliability tests are needed to simulate the impact of some harsh service conditions on the products in actual environment, so as to evaluate the service life and possible risks of the chip and improve the product performance.
Test itemsDifferent grades of products have different requirements. The purpose of reliability test is to prove that they meet the classification standards. The test items of reliability test are designed according to the specific application environment of different levels of products, simulate the environmental factors of products in normal use, and verify their functional consistency and durability.
| 要求 Requirement等級 Rank | 消費級 Consumption grade | 工業級 Industrial grade | 車規級 Automotive grade |
|---|---|---|---|
| 應用 | 手機、PC等 | 工業控制 | 汽車電子 |
| 溫度 | 0~70℃ | -40~85℃ | -40~150℃ |
| 濕度 | 中 | 根據環境 | 0~100% |
| 振動/沖擊 | 中 | 較高 | 高 |
| 壽命 | 1~3年 | 5-10年 | 15年 |
| 可靠性 | 中 | 較高 | 高 |
| 出錯率 | <3% | <1% | 0 |
Consumption grade| 試驗類別 Category | 試驗項目 Test Contents | 試驗條件 Condition | 試驗時間 Time | 樣品數量 S.S | 判定標準 Acc/Re | 參考標準 Reference |
|---|---|---|---|---|---|---|
| 環境試驗 | HTS (高溫存儲) | Ta=150℃ | 1000hrs | 77Pcs | 0/1 | JESD22-A103 |
| LTS (低溫存儲) | Ta=-55℃ | 1000hrs | 77Pcs | 0/1 | JESD22-A103 | |
| TC (溫度循環) | Ta: -65℃ to 150℃ （Ta: -55℃ to 150℃） | 500cycles (1000cycles) | 77Pcs | 0/1 | JESD22-A104 | |
| PCT (壓力蒸煮試驗) | Ta=121℃，RH=100%, 1atm | 96hrs | 77Pcs | 0/1 | JESD22-A102 | |
| HAST （高加速應力試驗） | Ta=130℃，85%RH Vds=80%VdsMax（Max=42V) | 96hrs | 77Pcs | 0/1 | JESD22-A110 | |
| uHAST （無偏高加速應力試驗） | Ta=130℃，85%RH | 96hrs | 77Pcs | 0/1 | JESD22-A110 | |
| H3TRB (高溫高濕反偏) | Ta=85℃，85%RH Vds=80%VdsMax（Max=100V) | 1000hrs | 77Pcs | 0/1 | JESD22-A101 | |
| Precondition (預處理 For SMD only) | Step1: TC: -65℃~150℃ 15min 5cycles Step2: Bake: 125℃ ，24hrs Step3: MSL: 30℃/60%RH ，192hrs Step4: IR: 260℃ ，3cycles | NA | 77Pcs | 0/1 | JESD22A-113 |
Industrial grade| 試驗類別 Category | 試驗項目 Test Contents | 試驗條件 Condition | 試驗時間 Time | 樣品數量 S.S | 判定標準 Acc/Re | 參考標準 Reference |
|---|---|---|---|---|---|---|
| 壽命試驗 | HTGB (高溫柵極偏置) | Ta=150℃，Vgs=100%VgsMax | 1000hrs | 77Pcs | 0/1 | JESD22-A108 |
| HTRB (高溫反向偏壓) | Ta=150℃，Vgs=100%VgsMax | 1000hrs | 77Pcs | 0/1 | JESD22-A108 | |
| 環境試驗 | HTS (高溫存儲) | Ta=150℃ | 1000hrs | 77Pcs | 0/1 | JESD22-A103 |
| LTS (低溫存儲) | Ta=-55℃ | 1000hrs | 77Pcs | 0/1 | JESD22-A103 | |
| TC (溫度循環) | Ta: -65℃ to 150℃ （Ta: -55℃ to 150℃） | 500cycles (1000cycles) | 77Pcs | 0/1 | JESD22-A104 | |
| PCT (壓力蒸煮試驗) | Ta=121℃，RH=100%, 1atm | 96hrs | 77Pcs | 0/1 | JESD22-A102 | |
| HAST （高加速應力試驗） | Ta=130℃，85%RH Vds=80%VdsMax（Max=42V) | 96hrs | 77Pcs | 0/1 | JESD22-A110 | |
| uHAST （無偏高加速應力試驗） | Ta=130℃，85%RH | 96hrs | 77Pcs | 0/1 | JESD22-A110 | |
| H3TRB (高溫高濕反偏) | Ta=85℃，85%RH Vds=80%VdsMax（Max=100V) | 1000hrs | 77Pcs | 0/1 | JESD22-A101 | |
| Precondition (預處理 For SMD only) | Step1: TC: -65℃~150℃ 15min 5cycles Step2: Bake: 125℃ ，24hrs Step3: MSL: 30℃/60%RH ，192hrs Step4: IR: 260℃ ，3cycles | NA | 77Pcs | 0/1 | JESD22A-113 |
Automotive?grade| 試驗類別 Category | 試驗項目 Test Contents | 試驗條件 Condition | 試驗時間 Time | 樣品數量 S.S | 判定標準 Acc/Re | 參考標準 Reference |
|---|---|---|---|---|---|---|
| 壽命試驗 | HTGB (高溫柵極偏置) | Ta=150℃，Vgs=100%VgsMax | 1000hrs | 77Pcs | 0/1 | JESD22-A108 |
| HTRB (高溫反向偏壓) | Ta=150℃，Vgs=100%VgsMax | 1000hrs | 77Pcs | 0/1 | JESD22-A108 | |
| 環境試驗 | HTS (高溫存儲) | Ta=150℃ | 1000hrs | 77Pcs | 0/1 | JESD22-A103 |
| LTS (低溫存儲) | Ta=-55℃ | 1000hrs | 77Pcs | 0/1 | JESD22-A103 | |
| TC (溫度循環) | Ta: -65℃ to 150℃ （Ta: -55℃ to 150℃） | 500cycles (1000cycles) | 77Pcs | 0/1 | JESD22-A104 | |
| PCT (壓力蒸煮試驗) | Ta=121℃，RH=100%, 1atm | 96hrs | 77Pcs | 0/1 | JESD22-A102 | |
| HAST （高加速應力試驗） | Ta=130℃，85%RH Vds=80%VdsMax（Max=42V) | 96hrs | 77Pcs | 0/1 | JESD22-A110 | |
| uHAST （無偏高加速應力試驗） | Ta=130℃，85%RH | 96hrs | 77Pcs | 0/1 | JESD22-A110 | |
| H3TRB (高溫高濕反偏) | Ta=85℃，85%RH Vds=80%VdsMax（Max=100V) | 1000hrs | 77Pcs | 0/1 | JESD22-A101 | |
| Precondition (預處理 For SMD only) | Step1: TC: -65℃~150℃ 15min 5cycles Step2: Bake: 125℃ ，24hrs Step3: MSL: 85℃/85%RH ，168hrs Step4: IR: 260℃ ，3cycles | NA | 77Pcs | 0/1 | JESD22A-113 |
Shanghai address：Room 1106, Building B, 2305 Zuchongzhi Road, Pudong New Area, ShanghaiHefei address：F1-706, Phase II, Innovation Industrial Park, No.2800, Innovation Avenue, High-tech Zone, Hefei city, Anhui Province
Tel：18217298861 Mr. Gao
Email：gaopp@siliup.com
